Search

Category
Price From
 to 
Other Filters

Glues, Fillers & Tools

  • Tamiya Finishing Abrasives P800
    Tamiya Finishing Abrasives P800
    Finishing abrasives are a key item for modelers - from cleaning up join lines to filing down putty or preparing a surface for a final finish, their uses are myriad. The material used on these sheets discourages gumming up of the surface. It can be used for wet or dry sanding. Sheet dimensions: 93mm x 226mm Contains 3x P800 sheets.
    NZ$ 11.90
  • Tamiya Finishing Abrasives P1000
    Tamiya Finishing Abrasives P1000
    Finishing abrasives are a key item for modelers - from cleaning up join lines to filing down putty or preparing a surface for a final finish, their uses are myriad. The material used on these sheets discourages gumming up of the surface. It can be used for wet or dry sanding. Sheet dimensions: 93mm x 226mm Contains 3x P1000 sheets.
    NZ$ 11.90
  • Tamiya Finishing Abrasives P1200
    Tamiya Finishing Abrasives P1200
    Finishing abrasives are a key item for modelers - from cleaning up join lines to filing down putty or preparing a surface for a final finish, their uses are myriad. The material used on these sheets discourages gumming up of the surface. It can be used for wet or dry sanding. Sheet dimensions: 93mm x 226mm Contains 3x P1200 sheets.
    NZ$ 11.90
  • Tamiya Finishing Abrasives P1500
    Tamiya Finishing Abrasives P1500
    Finishing abrasives are a key item for modelers - from cleaning up join lines to filing down putty or preparing a surface for a final finish, their uses are myriad. The material used on these sheets discourages gumming up of the surface. It can be used for wet or dry sanding. Sheet dimensions: 93mm x 226mm Contains 3x P1500 sheets.
    NZ$ 11.90
  • Tamiya Finishing Abrasives P2000
    Tamiya Finishing Abrasives P2000
    Finishing abrasives are a key item for modelers - from cleaning up join lines to filing down putty or preparing a surface for a final finish, their uses are myriad. The material used on these sheets discourages gumming up of the surface. It can be used for wet or dry sanding. Sheet dimensions: 93mm x 226mm Contains 3x P2000 sheets.
    NZ$ 11.90
  • ZAP PT09 ZAP Superglue Thin 1/2oz (14.1g)
    ZAP PT09 ZAP Superglue Thin 1/2oz (14.1g)
    Works best on: Metal, Wood, Rubber, Pottery, Most Plastics, Ceramics, China, Cloth Fabrics
    NZ$ 9.90
  • PRO SEAL Black RTV Instant Gasket, 3 oz, Tube, Oil Resistant/Sensor Safe
    PRO SEAL Black RTV Instant Gasket, 3 oz, Tube, Oil Resistant/Sensor Safe
    PRO SEAL BLACK RTV SILICONE INSTANT GASKET replaces cork,
    paper, asbestos and felt pre-cut gaskets and coats preformed gaskets for a reliable seal on oil
    pans, rear end housing, water pumps, valve covers, thermostat housings, electrical connections
    and wires. Also seals windshields, sunroofs, doors, lights and hose connections. This low volatile
    formula will not foul oxygen sensors and resists oil, transmission fluid, water, and antifreeze.
    NZ$ 10.90
  • Humbrol DecalFix 28 ml
    Humbrol DecalFix 28 ml
    A water-based solution for softening decals and securing them into position.

    Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints.

    Brush on to decals or immerse them in Decal fix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper.

    Drying Time is 20-30 minutes. Do not force dry decals as they may crease or shrivel.

    Excess product should be wiped away using a damp cloth.
    NZ$ 22.99
  • Humbrol ClearFix 28ml
    Humbrol ClearFix 28ml
    Humbrol Clearfix solvent-based polymer solution for use as an adhesive on clear plastic parts without the risk of the 'frosting' effect sometimes seen using traditional glues and for making small windows or translucent areas of 3mm or less Common plastics used to manufacture model kits including polystyrene and ABS

    A cocktail stick is usually the most practical means of application. Run a small drop of Clearfix around the edge of the window then draw across the opening to produce a thin membrane

    Drying Time: 24 hours

    Excess product should be wiped away using a damp cloth. Product is permanent once dry.
    NZ$ 22.99
  • Zap Rail-Zip 2 29.5ml Cleaner
    Zap Rail-Zip 2 29.5ml Cleaner
    Zap Rail-Zip 2 (29.5ml) Cleaner, perfect for cleaning train track, or slot car tracks.
    NZ$ 10.50
  • ZAP SLO-ZAP THICK CA 56.6g
    ZAP SLO-ZAP THICK CA 56.6g
    Zap Slo-Zap Thick CA 2oz (56.6g)
    Slow cure
    High strength
    Maximum gap filling formula.
    NZ$ 35.90
  • Zap Z-42 Blue Thread Locker Medium Strength
    Zap Z-42 Blue Thread Locker Medium Strength
    Finest blue thread locker you can buy! Lock set screws, axle and drive nuts, engine mounting screws, or any screw that keeps your R/C airplane, helicopter, car, or boat from coming apart. But Z-42 Thread Locker isn't just for hobbies, use on autos, boats, snow mobiles, lawn equipment, tools, bicycles, and even toys. Anywhere fasteners are subjected to vibration that can cause them to loosen and fall out Z-42 Thread Locker helps to keep things together.

    Works best on:

    Bolts

    Nuts

    Screws

    Threaded Fastners
    NZ$ 7.90
  • Humbrol Smart Mud for Diorama Texturing
    Humbrol Smart Mud for Diorama Texturing
    Smart Mud allows the quickly and creative high definition diorama texturing. Simple to use this single compound adheres well to diorama setups. . Once dry further painted and weathering effects can be applied if required.
    NZ$ 24.90
  • Tamiya - Epoxy Putty (Smooth 100g)
    Tamiya - Epoxy Putty (Smooth 100g)
    Tamiya item 87145 - Epoxy Putty Smooth, 100g Paint Tools / Materials

    #87145 Epoxy Putty Smooth, 100g - Tamiya Usable with: Re-modeling, detail fabrication, sculpting, kit modifications, repairs

    This Tamiya epoxy putty has a extremely smooth texture. Solidifly in around 12 hours at the temperature of 20C-25C

    100g
    NZ$ 34.99
  • Tamiya Lacquer Thinner - 250ml
    Tamiya Lacquer Thinner - 250ml
    This is the 8oz (250ml) bottle of Tamiya Lacquer Thinner.

    Product Features
    Thinner used for removing oil and paint from painting tools and brushes.
    Can also be used to thin Tamiya putty, liquid surface primer and lacquer paints.
    Product Specifications
    Tamiya Product Number: 87077
    What's Included
    8oz (250ml) bottle of Tamiya Lacquer Thinner
    NZ$ 16.99
  • Zap Goo Glue
    Zap Goo Glue
    Strong flexible adhesive/sealer. Bonds anything. Bonds can be cut with a razor knife. ZAP GOO is an excellent adhesive for today’s high tech composite airplane, boat, and car hobby products, and great for all of those fix-it, mend-it, seal-it, and stick-it jobs around the house. 1 fl oz tube.
    Works best on: Aluminum Ceramic China Clay Cloth Fiberglass Metal Most Plastics Plaster Pottery Rubber Wood
    NZ$ 8.90
  • Excel # 55666 Mitre Box Set
    Excel # 55666 Mitre Box Set
    Excel # 55666 Mitre Box Set

    Excel Blades - Mitre Box with K5 Handle + Saw Blade

    55666

    Metal Mitre Saw Set includes (1) Heavy Duty K5 Hobby Knife Handle with a 5 inch steel Pull Saw Blade with 46 teeth per inch and (1) 6 inch hand powered Excel Mitre Box
    Professional tool quality and ideal for hobbyists and wood workers and noted as an indispensable tool of the trade is engineered using high quality aluminum and steel for strength and durability.
    Features slots for two cutting angles at 45-degree and 90-degree.
    Used for: precisely cutting wood, plastic and metals, dollhouse building, scale woodworking and more
    Mitre Box can be purchased individually
    NZ$ 59.90
  • Excel Plastic Slide Clamps Size Large
    Excel Plastic Slide Clamps Size Large
    Excel Blades Large Adjustable Plastic Clamps

    55664

    SET OF 2 LARGE PLASTIC CLAMPS - Engineered using premium plastic materials for strength and durability, use this set of 2 adjustable clamps to securely hold delicate objects tightly together to prevent them from moving or separating.
    SECURE & STABLE - A mainstay in any professional DIY kit, these indispensable tools of the trade are your new go to for assembling, holding and securing objects securely in place during your project.
    INCH-MARKED SIDE BEAMS - The design of these 7 Inch plastic clamps incorporate side beams marked in inches for your convenience and are an ideal tool for architects, graphic artists, designers, hobbyists, and crafters.
    NOTCHED JAWS - The notched jaws on these plastic locking clamps help to keep your project steady, while the easy to use quick release lock releases the jaws at a moments notice.
    MADE IN THE USA - This USA made 7 inch mounting clamp set offers premium performance even during extended periods of heavy usage. For time-tested quality that you can trust, choose Excel Blades.
    NZ$ 19.90

«Prev123456Next »

X