Car Kitsets

This is an injection-plastic passenger car kit.


Hasegawa brings us a 1/24-scale model kit of the homologation model of the Lancia Delta HF Integrale 16V! This is a 1989 version that was also used as a base vehicle for motorsports. Decals are included. Order yours today!

[Mold Color]: Red
[Size]: Approximately 16.4cm long when completed
[Includes]: Decals

This is an injection-plastic racing car model kit.

Hasegawa brings us a 1/24-scale model kit of the Nissan 240RS that competed in the 1983 Monte Carlo Rally! Metal inlets and window painting stickers are included, as are additional plastic parts for the front bumper, underguard, roll cage, seat, and wheels; rubber tires are included too. New decals for the 14th place car in the 1983 Monte Carlo Rally, car no. 12 driven by Timo Salonen, are also included. Order yours today!

[Mold Color]: White
[Size]: 18.3cm long, 7.7cm wide when completed
[Includes]: Window painting stickers, new decals, rubber tires

Paints and glue sold separately.

This is an injection-plastic racing car model kit.


The Nissan 240RS (BS110) is a rally-spec homologation model (Group B) that appeared in 1983. It was developed based on the later model of the third-generation Silva (S110 type), and about 200 were produced. This 1/24-scale model kit from Hasegawa is based on research conducted on the actual car, and many parts from the exterior to the interior have been newly developed. The body parts are of the later model, with a changed shape around the side turn signals. Part of the engine is also made into a part, so that it can be seen through the hood louvers! The rear window is a type without heating wires; metal inlets and window paint-differentiated stickers are included.

Additional plastic parts are included for the following:

Hood, Front/rear bumper, Body rear panel, Rear quarter panel, Over fender, Side indicator, Mirrored taillight, Brake lamp, Rear window, Engine head, strut tower bar, Handle, Dashboard (left-hand drive), Front seat and Rear seat

Paints and glue sold separately.

This is an injection-plastic racing car model kit.


The Mazda Savannah Champ RX-7 from the anime "Regards Mechadoc," driven by Nachi Wataru, is now available as a 1/24-scale model kit from Hasegawa! 3D-printed parts for the front skirt integrated bumper are included, and decals are included too. The packaging features images from the anime, too! Order yours today!

[Mold Color]: Green
[Includes]: Decals

Paints and glue sold separately

A TASTY SWEET CLASSIC: AMT’s 1/25 scale 1966 Mustang Fastback 2+2 is a customizing kit for serious builders who are looking for a sweet build. Add it to your collection today!

LOADED WITH GOODIES: The 1966 Mustang is a sweet ride for classic muscle car builders. Fully paintable, it includes an EXPANDED decal sheet of authentically detailed water-slide decals. This righteously rad customizing kit includes a retooled body, clear headlight covers, custom grille and bumperettes, custom taillights, “Indy” filler cap, concave scoops, racing exhaust, custom front pans, mag wheels, racing headers, and more. Wrapped up nicely in vintage-styled packaging!

1:25 scale, skill level 2, paint & glue required
120+ parts
Molded in white, clear, transparent red and chrome
Black vinyl tires
Built scale: 7 inches long
Ages 14+

Made by AMT, scale 1/25 plastic kitset.

A PERENNIAL CLASSIC FOR EXPERIENCED MODELERS: AMT’s 1/25 scale 1967 Mustang GT Fastback is the perfect project for muscle car builders. Add it to your collection today!

FEATURE PACKED: The 1967 Mustang GT Fastback is a historical muscle car that stands alone! Fully paintable, it features authentically detailed water-slide decals. Build it upright with a Ford 289 V8 engine, Firestone Wide Oval tires, chrome wheels, optional Cobra valve covers, bucket seats, and more. Wrapped up nicely in retro-styled packaging!

Features:
1:25 scale, skill level 2, paint & cement required
123 parts
Molded-in white, clear, transparent red, and chrome plated.
Black vinyl tires
7” built length
Paint guide included
Ages 10+

This is a scale replica model kit of the GAZOO Racing TRD (Toyota Racing Development) 86. The TRD 86 is a car based on the Toyota 86 and optioned out by TRD, Toyota's in-house tuning shop. This GAZOO Racing version of the car was run in the Japanese TRD Rally Challenge series of events and is perhaps most notable for being driven by Toyota motor company president Akio Toyoda as his alter-ego 'Morizo.'

Plastic model assembly kit.

Paints and glue sold separately.

Initial D Toyota Levin AE86 Akyama Wataru. Made by Fujimi, scale 1/24 plastic kitset.

1985 Toyota Corolla Levin sponcered by Advan, 1985 Inter Tec Winner. Made by Fujimi, scale 1/24 plastic kitset.
Paints and glue sold separately.

Toyota AE86 Trueno Drift King. Made by Fujimi, scale 1/24 plastic kitset.

Toyota AE86 Trueno Treason Racing Team. Made by Fujimi, scale 1/24 plastic kitset.
Standard curb-side (no engine detail) kit of the Toyota AE86 Trueno, Mahbo. Body molded in white. Interior molded in grey. Metal black painted rims. Wheels turn and steer after assembly. Seat belts are included. No figures.

Paints and glue sold separately.

The Toyota AE86 Levin is an iconic car, especially in the world of drifting. It gained fame as the vehicle driven by the legendary Japanese racing driver Keiichi Tsuchiya, also known as the 'Drift King.'
The Toyota Drift King AE86 Levin by Fujimi Models allows you to recreate the iconic car in 1/24 scale.

Paints and glue sold separately.

This model kit allows you to recreate the late version of the Toyota Corolla Levin AE92 GT-Z, complete with a supercharger. The body parts come in black. Model scale 1:24

Paints and glue sold separately.

Hasegawa brings us a kit of the Advan Corolla Levin AE92 with parts to recreate the car that competed in the 1989 JTC! It includes 118 parts, and will be about 179.5mm long and 72mm wide when completed.

Decals (Markings) included for: 1989 All Japan Touring Car Championship Round 6 (Final Round) Inter TEC (Fuji Speedway: 11-12 November 1989) Tsuchiya Engineering Car No. 25 Driver: Kazuo Mogi/Sakae Obata Division 3 Class Winner (12th overall)

Additional plastic parts:

Race suspensions
Exhaust pipe
Roll cage
Seat
Dashboard
Door mirrors
Wheels

Toyota Corolla Levin EA92GT Apex. Made by Hasegawa , scale 1/24 plastic kitset.